A natural progression in InnerLogic’s proven record of innovation, the ProLine 2260 offers expanded thickness capability and optimized cutting speeds in the highest amperage precision high-density plasma cutting system offered today.

This manually controlled 260 amp system offers the best value when production cutting most metals to 1-1/4” thick, and it has a maximum capacity of up to 2". Uncompromising precision cut quality, combined with highest processing speed and low initial investment, equates to the lowest possible cost to produce quality-finished parts. With the ProLine 2260’s manual controls, you can tailor all of the cutting parameters to your specifications. Optionally, our patented INOVA torch height control system can be built into the ProLine 2260, greatly simplifying installation.

Whether you need precise, clean, dross free edges on thinner metals or you need the same high quality when cutting 1" steel at 62 inches per minute, the ProLine 2260 can deliver. If your goals include maximum productivity on the widest range of thicknesses, combined with optimum cut quality, economical operation, and modest initial cost, the ProLine 2260 by InnerLogic is the plasma system for you.

3-Year Power Supply Warranty! PROLINE TORCH -260 amps @ 100% duty cycle -Dual gas -Liquid cooled -Built in initial height sensing capability -Extended life, low cost consumables -Plasma marking capability

PROLINE POWER SUPPLY
-Rated 260 amperes DC @ 100% duty cycle
-Advanced technology, high efficiency chopperstabilized current output
-Dual 600-ampere IGBT chopper transistors for high reliability
-Current overshoot reduction circuitry for longer electrode and nozzle life
-Very low transferred arc current sensing for higher starting height and longer nozzle shield life
-Fast switch transferred arc for extended nozzle life
-100 GPH re-circulating torch coolant system
-0.4 amps pk - pk output current ripple at 260 amps
-3-phase input, 50 KVA, 208v (140a), 230v (127a), 380v
(77a), 415v (70a), 460v (63a), 575v (51a)
PROLINE MANUAL GAS CONSOLE
-Panel mounted pressure regulators set preflow, plasma, shield, and postflow gas pressures
-Contains optional Inova torch height control electronics

The ProLine 2260 is one of three systems in the InnerLogic “ProLine” family. Other ProLine systems offer identical cut quality but each has a unique amperage range and corresponding thickness capacity. InnerLogic also offers four similar machines in our “FineLine” family. The FineLines are our most advanced systems. They offer cut quality identical to the ProLines but offer automatic setting of all process parameters, making the FineLine systems the most user-friendly systems on the market.

---

With Inova, There's no Question Who's in Control

With the Inova torch height control system, you can program more functions, set tighter parameters, and get better resolution. Inova reduces cycle time and gives you a more accurate cut. It is the most versatile torch height control yet. And you can use it on any plasma system - even one you already own.

Inova is Precisely What You Need! We've given the Inova a microcontroller with 35 programmable functions and interfacing for 8 torch stations. Program as few as 3 functions (pierce height, cutting height, and arc voltage) and you're up and running. You get precision and stability for all plasma cutting, especially high-density, precision plasma cutting applications. It has a state of the art anti-collision system to protect the torch. It also has an optional operator's remote control with touch screen to give you greater flexibility.

Easy to Program - A microcontroller provides more programmable functions, including:

• Arc voltage - 50 to 250 volts in .1 volt increments
• Manual travel speed
• Plate sensing speed during initial pierce height setting (IHS)
• Adjustable plate touch force during IHS (touch force method is used as a backup to soft-touch ohmic contact method)
• Initial pierce height
• Cutting height (torch moves to the cutting height after the pierce time is complete but before the arc voltage control (AVC) mode is activated
• Pierce time (time before the torch moves to the cutting height)
• Partial raise height (retract distance from the last cutting height)
• Torch retract delay
• Corner AVC disable (prevents torch diving during corners)
• AVC delay (delay time from the removal of a corner AVC disable signal and the resumption of arc voltage control)
• High to low speed crossover point during IHS
• Cycle complete signal
• Plasma gas preflow during IHS - on/off
• Clear-the-plate (ohmic plate sense) - on/off
• Arc voltage limiter - on/off
• Automatic collision avoidance - on/off
• Adjustable gain
• IHS test/run (test the initial pierce height without starting the plasma torch)

• Arc Voltage Control
• DSP servo system is the most advanced voltage control available. Maintains arc voltage with the highest degree of accuracy: +/- .4 volts
• Arc voltage setting in .1 volt increments
• Responds at speed up to 600 inches per minute
• Rapid response means arc voltage control available for low, intermediate, or high speed plasma arc cutting
• Initial Height Positioning
• Patented plate sensing technique requires no external switches or devices
• Soft-touch ohmic contact plate sensing works on all plate thicknesses
• Manual positioning if automatic pierce height positioning is not desired
• Programmable Partial Raise
• Allows retraction distance to be set between 0 inches and full raise
• Improves cycle time and output
• Automatic Gas Initiator
• Starts plasma preflow gas simultaneously with IHS sequence
• Saves several seconds on each cut, allowing more cuts per hour
• Arc Voltage Control Limiter
• Helps prevent torch damage during kerf crossing
• Corner Height Freeze
• Disables arc voltage control while cutting
• Prevents the torch from diving into the workpiece during corners or when initially piercing heavy plate
• Cycle Complete Signal
• Alerts the x/y machine controller when the plasma torch has been fully retracted
• Retraction Delay
• Programmable torch retract delay time allows current and gas slope down to occur before retracting the torch at the end of a cut, extending electrode life
• X/Y Partial Raise Enable/Disable Signal
• Can be used to return the torch to the upper limit switch for long x/y machine traverses
• RS-422 Serial Communication Link
• Allows full control from x/y machine controller
• 8 torch stations can be installed on a single network
• Finer Resolution
• Inova gives you a position control with an encoder resolution of .0001 inch and an arc voltage setting resolution of .1 volt. This precise setting gives you unparalleled control over your cut, with the smallest cut angle, kerf width, and face variation.